Home > Hard Drive > How To Install A Hard Drive In A Pc

How To Install A Hard Drive In A Pc


Most do not, but you never know. When mounting drives in a system, try to leave as much space between them as possible to maximize airflow over the tops and bottoms. Positioning the drives directly in front of an Use a SATA cable to connect the hard drive to the motherboard. So I would venture to say that there is something somewhere that is preventing the MB from getting to the part of looking for another drive. weblink

Reply David on April 19, 2008 at 7:41 am Great! As in, could I possibly boot to the SSD, format it and install Windows from a separate drive onto the SSD? Check now to see if you have room to fit another one in there. Took me hours of wading through other websites of gobbledygook to get nowhere. http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Help-locating-hard-drive-position-on-motherboard/td-p/5842039

How To Install A Hard Drive In A Pc

o7 ColifJun 10, 2016, 4:07 AM There are three WD reps on this forum, amazingly they seem to avoid the posts about WD drives I answer. X:\Program Files Also this will be great insurance in case your system won’t boot, requiring you to perform a clean installation on C – rather than betting fingers crossed on Data ColifJun 10, 2016, 4:18 AM Sorry, I missed that screen shot before. What's the greatest height at which a bird has collided with an aircraft?

Otherwise I would have to get an IDE drive because I do have an extra IDE port. At the time of this revision, EIDE drives are being used less and less, and SATA (Serial ATA) drives are becoming the new standard. Connecting SATA Drives If you are using a SATA (Serial ATA) drive, you don't have to worry about jumper settings or clumsy ribbon cables. How To Connect Hard Drive To Motherboard Sometimes, though, the power connector can become stuck.

http://pad2.whstatic.com/images/thumb/e/e1/Install-a-Hard-Drive-Step-6-Version-3.jpg/550px-Install-a-Hard-Drive-Step-6-Version-3.jpg http://pad2.whstatic.com/images/thumb/e/e1/Install-a-Hard-Drive-Step-6-Version-3.jpg/300px-Install-a-Hard-Drive-Step-6-Version-3.jpg /b/b9/Install a Hard Drive Step 6 Version 2.360p.mp4 If you can, use a slot that has some space around it. While the SSD is in the only options to choose for boot order is the W SSD or SSD. After removing the fixing screws (there are four, two on each side of the drive bay) gently take the drive out of the chassis and put it to one side. http://www.wikihow.com/Remove-a-Hard-Drive http://pad1.whstatic.com/images/thumb/0/0b/Install-a-Hard-Drive-Step-17-Version-2.jpg/550px-Install-a-Hard-Drive-Step-17-Version-2.jpg http://pad2.whstatic.com/images/thumb/0/0b/Install-a-Hard-Drive-Step-17-Version-2.jpg/300px-Install-a-Hard-Drive-Step-17-Version-2.jpg /a/a0/Install a Hard Drive Step 17.360p.mp4 6 Insert your new hard drive.

Heck, I've even had to go to Wikipedia to understand what SATA is!Great website! How To Install A New Hard Drive Windows 7 Next, let's look at Installing Auxiliary Drives. Worked like a charm."..." more - D. I suggest that you sit down.

  1. I think its a question of formats.
  2. Showing results for  Search instead for  Do you mean  or Post new question Post new question Question Reply Topic Options Subscribe Mark Topic as New Mark Topic as Read Float this
  3. I upgraded the IDE with a SATA adapter(should I remove the jumper then?).
  4. By convention, most computers locate the hard drive near the front of the case, near other drives (like your optical drive).
  5. Step 2: Backup Although we’re not anticipating any problems, it’s good practice to back up your crucial data before doing any kind of hardware alteration.
  6. I'm guessing it doesn't matter because the cable itself doesn't provide the voltage, it's just a maximum tolerance?
  7. SATA drives use thinner, flexible cables that are easier to route through the case and that improve airflow.
  8. Installing an IDE hard drive The first thing to do is to locate the drive bay where the device will go.

How To Format A New Hard Drive

Is there anyway to solve this problem? http://www.helpwithpcs.com/upgrading/install-hard-drive.htm I always prefer this sort of case design, all else being equal. How To Install A Hard Drive In A Pc angry in OHIO Reply Nepe on March 8, 2009 at 5:25 am I installed my original HD in the second bay as a slave and was able to access my files. How To Install A Second Hard Drive Reply Geoffrey on January 5, 2009 at 10:25 am This guide helps even those who are good at computers.

In contrast to your dated IDE statement; Considering the age and interface, IDE users would likely find them selves in more need of a how to article like this than current have a peek at these guys Reply Kyle on November 9, 2007 at 2:12 am Well I just wanted to say that i have been struggling with my sata HD for over a week now. You will see both a ribbon cable and a small power plug. Community Q&A Search Add New Question How do I reuse the hard disk once it is removed from the PC? Install New Hard Drive Windows 10

Would this be my hard drive. I have My Pri Master and DVD burner on IDE0, and I needed to add 2 more HDD from my old computer to pull information off, and use them as more Reply JP on August 10, 2007 at 5:06 pm I'm trying to add a second SATA hard drive to my Dell. http://extrawebsolution.com/hard-drive/install-new-hard-drive-windows-10.html the least you could do. ____________________________________________ For folks thinking of buying a new HDD, it is wise to know the supported SATA type (SATA II/SATA III) and SATA PORT SPEED (SATA

By the four sentence, you are assuming that everyone reading this will understand what ‘jumpers' are. How To Connect Sata Hard Drive To Motherboard Suggestions? You may just save yourself some money, and Amazon ranks among the very best vendors on the Web for customer satisfaction.

I'll be back for more later.

Angelus_GabrielJun 10, 2016, 1:42 AM Maxwellmelon:So I tried what you suggested and sadly it did not work. and i cant figure out how to get past this and what is wrong? It is up and running but now my computer does not recognize my second drive. New Hard Drive Not Showing Up Here it is again: http://s33.postimg.org/swsmi0k5r/image.pngI guess I will look into the Gigabyte forums and see if they can help me.

Additional batteries are affected. Also go into your BIOS and check if the SATA controller is in AHCI mode. Not all laptop hard drives are secured by screws. 5 Pull the ribbon to release the hard drive. this content One will be power.

Some enthusiast-class also cases give users the ability to remove drive cages or to mount them in different positions to optimize air flow and simplify cable management. Saved me a lot of messing around.Just the right amount of geekiness in my opinion for what it's worth! Reply 0 Reply 0 0 Everyone's Tags: Microsoft Windows XPPavilion a744x View All (2) mdklassen Professor Posts: 1,872 Member Since: ‎12-04-2012 Message 2 of 3 (104 Views) Report Inappropriate Content Re: Odd its protecting a C drive like that.

Breaking change in method overload resolution in C# 6 - explanation? Reply Morerubbish2 January 23, 2011 at 9:43 pm Most of the information given is the same as here. So once again I am screwed over by my SSD. Some may have metal retention clips, while others do not.

Replace the case sides and reconnect your cables if you had to move the case to work on the inside. One problem though - after setting up the new drive and using Norton Ghost 10.0 to clone the old drive, I can't boot from the new drive. I had overlooked the pci versions. To reinstall Windows, follow the guide that matches your operating system: Windows XP Windows Vista Windows 7 Windows 8 To reinstall OS X, follow the guide that matches your operating system:

© Copyright 2017 extrawebsolution.com. All rights reserved.